adhesive power
英 [ədˈhiːsɪv ˈpaʊə(r)]
美 [ədˈhiːsɪv ˈpaʊər]
附（粘）着力；附着功率
双语例句
- This paper dealt with the methods for increasing the properties of glass fiber reinforced PP ( GFRPP) and the adhesive power of glass fiber and PP.
探讨了提高玻纤增强聚丙烯性能、提高玻纤与聚丙烯结合力的方法。 - Construction could be improved heat sealant viscosity on the sub base material, and therefore the majority of base material was sticky adhesive has good power.
热施工可改进密封胶对被粘基料的湿润能力，因此对大多数被粘基料具有良好的粘接力。 - And designs the flexible relief block printing ink characteristic of good flexibility, strong adhesive power, well-antifreezing and low cost.
设计出具有柔性好、附着力强、抗冻性好，且成本低的柔性凸版油墨。 - The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.
对蜂窝纸板专用粘合剂在合成路线，工艺配方等方面进行了讨论，并对该种粘合剂的组分对其在粘度和干燥速度等方面的影响进行了分析。 - Adhesive power, peeling strength, chromatic aberration, impact strength retention rate and other indicators can be more comprehensive characterization of color profiles of weathering resistance.
附着力、剥离强度、色差、冲击强度保留率等指标能比较全面的表征彩色型材的耐候性能。 - Aluminum film is produced on glass, H13 steel, plastic and pure Cu substrate by resistance heating vacuum evaporation, and the adhesive power of aluminum film is determined and analyzed.
采用电阻加热式真空蒸镀法在玻璃、H13钢、塑料和纯铜基体上镀制铝膜，并对其附着力进行了测试和分析。 - S: The use of MQ silicone resin as reinforcing material for additive type liquid silicone rubber ( LTV) could endow the LTV with better mechanical properties and fluidity. It has better adhesive power for metals, glasses and ceramics.
MQ树脂用作加成型液体硅橡胶（LTV）的补强材料，可赋予LTV较好的机械性能、很好的流动性，对玻璃、陶瓷等材料较好的粘接性； - The obtained stainless steel colored film is bright and beautiful, assuming the golden color, which has excellent corrosion resistance, wear resistance and good adhesive power.
所得到的不锈钢着色膜光亮美观，呈金黄色，具有优良的耐蚀性、耐磨性和良好的附着力。 - Study on the New Type of High Thermal Conducting Adhesive Used in Power Electronics Package
新型电力电子器件封装用导热胶粘剂的研究 - Study on the Adhesive Power of Aluminum Film on Different Substrate Prepared by Vacuum Evaporation
不同基体真空蒸镀铝膜的附着力研究 - The coating has high strength, strong adhesive power and good wear resistance.
涂层硬度高，附着力强，耐磨性好。 - Development of Zn/ Al_2O_3 and Zn/ SiO2 Combined Platings and Study of Their Corrosion Resistance and Adhesive Power
Zn/Al2O3和Zn/SiO2复合镀层的研制及其耐腐蚀性和结合力的研究 - The glue has some technical characteristic such as great elongation, high elasticity, strong adhesive power with concrete, adjustable color, fitting surface-drying time, tolerably working on the condition of moist slot, and so on.
该嵌缝材料具有伸长率大、弹性高、与混凝土粘接力强、色彩可调、表干时间适宜，并可在缝内潮湿情况下施工等技术特点。 - Density surface tension wettability and adhesive power of liquid Al and Al-RE Alloy on BN surface
液态Al和Al-RE合金的密度、表面张力及对BN的润湿性和附着功 - Construction technique for ZL adhesive power polystyrene particle exterior insulation External heat preservation plastering construction technology with ZL gum powder polyphenyl granule
ZL胶粉聚苯颗粒外保温施工工法ZL胶粉聚苯颗粒外墙外保温抹灰施工工艺 - Conclusion EDTA with density 10% is more effective in both the rinse of smear layer of root canal and the enhancement of adhesive power of casting post.
结论浓度为10%的EDTA在去除根管内玷污层，提高桩冠固位力方面效果最好。 - Wheel rail adhesive power is an important variable deciding tractive performance of electric locomotives, but it is not a directly detectable variable.
轮轨粘着牵引力是决定电力机车牵引性能的重要参量，但不能被直接检测到。 - The performances of three kinds of gels were compared by the experiments of viscosity, gel intensity, syneresis rate, adhesive power, gel freezing point as well as melting point and so on.
进行黏度、凝胶强度、凝胶水析率、凝胶黏着力、凝胶凝固点及熔点测定等试验，以对比几种凝胶的性能。 - Investigation on adhesive power of silicon film to glass substrate
玻璃基板上硅薄膜附着力的研究 - The 3rd-generation MSCs were cultured combining with PLGA-ASP-PEG in vitro, while cells cultured in PLGA as control group. The cell adhesion rate and the adhesive power were examined by conventional precipitation method and micropipette aspiration technique respectively.
将第3代MSCs以1.0×106/ml接种到PLGA-ASP-PEG材料上，测定细胞黏附力和黏附率； - This observation led to the presumption of a struc-tural model of the electrode and explained the beneficial effects of the intermediate layer on depressing the interfacial resistance of the electrode and improving the adhesive power between both β-PbO_2/ SnO_2 and Ti/ SnO_2.
因而提出了电极结构模型的假设，并且解释了中间层对降低界面电阻，改进β&PbO2/SnO2与Ti/SnO2之间结合强度的有益作用。 - On Line Detecting Adhesive Power of Electric Locomotives
电力机车粘着牵引力的在线检测 - The experimental results showed that the adhesive has good adhesive power for APET packaging films when the total mole ratio of NCO/ OH is 1.4, the amount of BDO is 14%, the TMP is 4%, the curing time is 10h.
结果表明，当总NCO/OH摩尔比为1.4，BDO的量为14%、TMP的量为4%，固化时间为10h，该胶粘剂对APET包装膜粘结性能好。 - Traditional methods of producing catalyst coating have disadvantages of complex technology and higher cost, and the coating granules are easily broken off owing to weak adhesive power and then block the reactive channel.
传统的催化剂涂层制备方法工艺复杂、成本较高，存在涂层附着力不强、容易脱落及堵塞通道等问题。 - A comprehensive research was conducting on the relations among its solidified behavior, vitrification point, adhesive power, impact strength and peel strength.
研究了导电涂层固化行为与玻璃化温度、附着力、冲击强度和剥离强度之间的关系，确立了导电涂料的最佳固化条件。